Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
product_variation
product

Day Cruiser Runabout Cover (with Inboard Motors)

*The video showcases a side console boat, yet the method of fitting and securing the cover remains consistent throughout our complete range of semi-custom boat covers.

SIZES RANGE FROM 6.7m UP TO 10.2m BOAT LENGTH 

V-Hull High Profile Style (XL SIZES) Icons

Comes in 2 styles for Inboard or Outboard motor boats. Trailerable high-quality cover. Design to fit Runabout-type boats, suitable for boats with bow rails up to 500mm high and windscreens up to 600mm high.
When measuring your boat, use the overall fabric measurement instructions below for a more accurate boat cover selection.

BOAT LENGTH
WIDTH
ORDER CODE
BOATS WITH INBOARD MOTORS
6.7m – 7.2m (21′ 9” – 22′ 6”)  2.7m (8′ 8”) MA 203B-15
7.2m – 7.8m (22′ 7” – 25′ 6”) 2.7m (8′ 8”) MA 203B-16
7.8m – 8.4m (25′ 7” – 27′ 6”) 2.9m (9′ 6”) MA 203B-17
8.4m – 9.0m (27′ 7” – 29′ 6”) 3.1m (10′ 2”) MA 203B-18
9.0m – 9.6m (29′ 7” – 31′ 6”) 3.1m (10′ 2”) MA 203B-19
 9.6m – 10.2m (31′ 7” – 33′ 6”) 3.1m (10′ 2”) MA 203B-20
Boat Length
  • SKU: MA 203ABP
OVERALL FABRIC
MEASUREMENTS

1. Measure the Overall Fabric Length
Using a tape measure, take the following measurements on your boat making sure you measure from 15-30cm below the point of the bow of the boat (assume this is where the hem of the cover will be) all the way back to 15-30cm below the stern, ensuring the tape measure goes over the windscreen.
If you have a Bimini, ensure this is folded down and resting on the gunwales and that when you measure from bow to stern the tape measure goes over the folded-down Bimini.
If you have a permanent Bimini or other similar structure mounted on your boat, this style of cover will not be suitable for your boat. Please look at the Jumbo or Pilot / Cruiser style semi-custom covers.

1. Measure the Overall Fabric Width
Using a tape measure, take a measurement 15-30cm below the widest part of your boat on the Port side gunnel and across to 15-30cm below the opposite Starboard gunnel ensuring that the measurement goes over the highest part of the boat, ie, windscreen.

Once you have these 2 overall measurements refer to the below table showing the overall cover dimensions for each size of cover offered and match up to arrive at the best fit for your boat.

 

BOAT LENGTH
FABRIC WIDTH
FABRIC LENGTH
ORDER CODE
6.7m – 7.2m (21′ 9” – 22′ 6”) 4.9m 9.4m MA 203B-15G
7.2m – 7.8m (22′ 7” – 25′ 6”) 4.9m 10m MA 203B-16G
7.8m – 8.4m (25′ 7” – 27′ 6”) 5m 10.6m MA 203B-17G
8.4m – 9.0m (27′ 7” – 29′ 6”) 5.2m 11.2m MA 203B-18G
9.0m – 9.6m (29′ 7” – 31′ 6”) 5.3m 11.8m MA 203B-19G
9.6m – 10.2m (31′ 7” – 33’6”) 5.4m 12.4m MA 203B-20G
FABRIC
DETAILS

Atlas Marine Fabrics Gray
Weight 280 g/m2
Material 100% High Tech Polyester
Water Column ≥ 150 mbar (1500 mm)
Light & Weather Fastness Note 6-7
Tensile Strength ≈ 2200 N¹ | 1400 N²
Elongation ≈ 40 %¹ | 30 %²
Colour Fastness to rubbing Note 4-5³ | Note 44
Chlorine Resistant Note 4-5
Water Repellency Note 100
Oil Repellency Note 4
Coating Polyurethan [PU]
UV Protection Factor UPF 50+
(measured value > UPF 80)
Visit the ATLAS Fabrics website